Bring Your Beer Right to you with a Beer Keg Tap
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Kegs are very ideal to those who drink a lot which is also cost effective and money saving. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. You can splash foam all over you or all over your face. Getting beer from a keg tap looks easy but it is not as easy as it looks.
In order to get beer from the keg, you need to control the keg tap. This uses a lever and through pulling and pressing it, the beer is released. You can get you beer when the pressure is released and it pushes the beer up to your glass. The keg tap is technically a switch and may be an on-off or a close-open switch.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. When there is too much movement while transporting the keg, the foam builds up. In order to minimize the foal, place the keg where you plan to serve the beer and let it stay for a while. It is harder to tap with the cap or seal so you should remove it. Since pros know how not to put the beer at risk they don’t remove the cap or seal. If you will do it, you need to play it safe.
A portable keg system can be tapped with CO2. The keg receives pressure in a single unit pump and tap combination and this is called party pump. The beer keg tap is separated from the keg. To release the pressure in the ked, the pump is attached and the faucet is opened. You can release beer by applying air pressure to the keg by pumping and pushing the lever or the tap handle.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. Traditional keg uses an on and off valve. By using this, you are serving by gravity, and there is no air pressure needed. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.